#Billiards rack hinge full size

Hide an extra thickness or two behind fluted columns or such for extra mass to mount your hinges. The simplest method I have ever used is 3/4 sides and backs, screwed and glued cases. They make a continuous hinge that is very heavy duty - made for situations such as the front doors into a high school - lots of use and abuse.

You might also look into Roton (now owned by Hagar Hinge). Mock it up in the shop in the raw - this was easy for us, since we were doing the rest of the millwork and paneling in the room with it. We worked with the A/V electronic guy on this.

The door was magnetically locked and opened - operated by the owner's voice (open sesame?). Like contributor S's, we also usedĤx4 ball bearing hinges - no slide bolt. It's nice to see a clean execution.įine Homebuilding recently had an article on this. Nice job, contributor S! Many of our customers don't want anyone to know what we've built, so we don't get many images. Thank you very much to all of you - you were very helpful. You could sit on the john, inches away, and never know. The upper shelf hinged to expose the lock and the rest of the shelves swung in with the back/door. We used 3/4 for the back and used several magnetic contacts to keep the back tight to the sides. It was a built-in shelf unit in the master bath. We did sort of the same thing for a customer. You can not tell at all that it is there. Since the floors were all wood, I worked with the flooring guy to have him feather floor down when door swings open so shoe would not catch as it swings. 4' wheel built into outbound edge to support door as it swings open. Slide bolt mortised into underside of chair rail.

#Billiards rack hinge full size

All the trim is coped including shoe.Ĭlick here for higher quality, full size imageīall bearing 4x4 hinges screwed through into framing. (My doorway was only 30'.) Keep that in mind on your own project.Ĭue rack, but same premise as bookcase. I thought about using a pivot hinge for a current bookcase project, but skipped the idea since a 12' deep bookcase on a pivot would eat up more than 12' of the doorway when opened 90 degrees. Gary Katz has illustrated step by step instructions for this that tells you everything you need to know at: I just ordered some Rixson h117-3/4 center pivot hinges. People won't notice it unless they walk over to it and look straight down at where the door and the trim meets - but you'll know. The door in the one I did was about 5'x2' and even though it's all 3/4' ply, the bottom racks inward about 1/2'. One thing I learned, though, is that you have to over-engineer the door. Since I don't have the paperwork close at hand, I can't give you the part number that I used, but I think the number for the bottom pivot was 128-3/4 and the top was 320. I've done the same sort of thing as you're about to do and I used a pair of Rixson pivot hinges with great results. Has anybody ever done this? What hardware do you use? I'd like it to open as a door, so I'd like to use some kind of hinges. One of them has to open on a hidden room. I have to produce a library room with four bookcases.